Beginner's Guide

How to Install Python 3.9.3 Update on Ubuntu 20.04 LTS

Pinterest LinkedIn Tumblr

Today we learn How to install Python on Ubuntu , Welcome to itsFoss.net well if you’re using Ubuntu, and you will know about open source software and Linux then you definitely know about Python programming language, well in-shot Python is a widely used general-purpose, high level programming language. Mostly used to write scripting and automation. It is a very popular language known for its simplicity and easy syntax (about my personal thought Python is the worlds best programming language), Actually Python was created in the late 1980s and It was first released by Guido van Rossum in 1991 and further developed by the Python Software Foundation as their successor to ABC Programming Language .

woah woah i thought it’s enough to know about python at beginning well lets go straight-to-the-point, and today’s our point is How to install Python 3.9.1 in Ubuntu 20.04 LTS (By default Ubuntu preloaded with python 3.8) so lets go I’m going to start with following simple steps just follow and boom.

Step 1 — Setting Up & Installation Python 3.9

Ubuntu 20.04 By default ship with Python 3 pre-installed. To make sure that our versions are up-to-date, let’s update and upgrade the system with the apt command;

$ sudo apt update && sudo apt upgrade

After Process complete next command is,

$ python3 -V

Output;

$ python3 -V
Python 3.8.3

So We have older version of python, and we all want to install and upgrade old version into newer one so Next Before adding the PPA its good to install software-properties-common package to easily manage distribution and independent software vendor software sources.

$ sudo apt install software-properties-common
$ sudo add-apt-repository ppa:deadsnakes/ppa

Now install python 3.9 or Newer version using apt command:

$ sudo apt-get install python3.9

Step 2 – Install Python 3.9.3 on Ubuntu 20.04 from Source;

  • Now, download the Python 3.9.1 source code from official download site. Switch to a relevant directory and use wget to download source file.
$ cd /opt 
$ sudo wget https://www.python.org/ftp/python/3.9.3/Python-3.9.3.tgz
  • Next, extract the downloaded archive file and prepare the source for the installation.
$ tar xzf Python-3.9.3.tgz 
$ cd Python-3.9.3
$ sudo ./configure --enable-optimizations
  • Python source is ready to install. Execute make altinstall command to install Python 3.9 on your system.
$ sudo make altinstall
  • The Python 3.9.3 has been installed on Ubuntu 20.04 LTS. Verify the installed version:
$ python3 -V 
Python 3.9.3

Conclusion

In this Article Howtos tutorial, you have learned How to install Python 3.9 & 3.9.3 on Ubuntu 20.04 using Apt and source code. You can try Python examples via command line. using python wiki

7 Comments

  1. Pingback: How to install Pitivi Video Editor 2021.1 on Ubuntu Linux - LinuxStoney

  2. Pingback: Free Python Programming – From Basics to Advanced level (Limited Offer) - itsfoss.net

  3. Hi, there is some problem in extracting the downloaded archive files.
    I am getting this message for all the files in the source zipped package

    tar: Python-3.9.4: Cannot mkdir: Permission denied
    tar: Python-3.9.4/CODE_OF_CONDUCT.md: Cannot open: No such file or directory

    Can you suggest what should i do to get permission from root directory? thanks

    • 1st copy downloaded file to different place and give them full root permission by clicking right click and allow read write permission and then try to extract and install

  4. Jonecir Souza Reply

    Hi, I followed your instructions, however when executing $python3 -V command, it shows “Python 3.8.5”, instead of 3.9.5 which I downloaded.

  5. kak snaaks Reply

    “make -j 12” is missing and so nothing it built.

    $ tar xzf Python-3.9.3.tgz
    $ cd Python-3.9.3
    $ sudo ./configure –enable-optimizations
    $ make -j 12
    $ sudo make altinstall

Reply To Mansi Cancel Reply